![counter_bore_taper_shank](https://ptccutters.com/wp-content/uploads/2021/10/counter_bore_taper_shank.jpg)
A cutter with teeth on the periphery and the end, integral with Morse Taper Shank, and having a detachable pilot. The Cutter is intended for producing a flat seating for the accommodation of the head of a bolt set screw etc. and is located by means of the pilot with relation to a center hole. Counter bores of size upto and including 1/2″ dia. are supplied with solid pilot.
Specifications Confirm to : IS 5710 1988, ISO 4207 – 1977.
Product Specification
Diameter (in mm) | Cutting Edge Length | Overall Length | Morse Taper No. | Pilot Diameter |
13.5 | 22 | 132 | 2 | 5.0 to 11.2 |
14.5 | 22 | 132 | 2 | 5.0 to 12.5 |
16.5 | 25 | 140 | 2 | 6.3 to 14.0 |
17.5 | 25 | 140 | 2 | 6.3 to 14.0 |
19.5 | 25 | 140 | 2 | 6.3 to 16.0 |
20 | 25 | 140 | 2 | 6.3 to 18.0 |
22 | 30 | 150 | 2 | 8.0 to 18.0 |
23 | 30 | 150 | 2 | 8.0 to 20.0 |
25 | 30 | 150 | 2 | 8.0 to 22.4 |
26 | 35 | 180 | 3 | 10.0 to 22.4 |
28 | 35 | 180 | 3 | 10.0 to 22.4 |
29 | 35 | 180 | 3 | 10.0 to 25.0 |
30 | 35 | 180 | 3 | 10.0 to 25.0 |
31 | 35 | 180 | 3 | 10.0 to 25.0 |
33 | 40 | 190 | 3 | 12.5 to 28.0 |
34 | 40 | 190 | 3 | 12.5 to 28.0 |
35 | 40 | 190 | 3 | 12.5 to 31.5 |
36 | 40 | 190 | 3 | 12.5 to 31.5 |
37 | 40 | 190 | 3 | 12.5 to 31.5 |
39 | 40 | 190 | 3 | 12.5 to 31.5 |
40 | 50 | 236 | 4 | 16.0 to 35.5 |
41 | 50 | 236 | 4 | 16.0 to 35.5 |
43 | 50 | 236 | 4 | 16.0 to 35.5 |
46 | 50 | 236 | 4 | 16.0 to 40.0 |
48 | 50 | 236 | 4 | 16.0 to 40.0 |
51 | 63 | 250 | 4 | 20.0 to 40.0 |
53 | 63 | 250 | 4 | 20.0 to 45.0 |
55 | 63 | 250 | 4 | 20.0 to 45.0 |
57 | 63 | 250 | 4 | 20.0 to 50.0 |
59 | 63 | 250 | 4 | 20.0 to 50.0 |
61 | 63 | 250 | 4 | 20.0 to 50.0 |
63 | 63 | 250 | 4 | 20.0 to 56.0 |